Large capacity bottle automatic blowing machine


Features of the TH Series Hand Insert Blow Molding Machine:

1. It adopts microcomputer control system, which has manual and automatic modes, simple operation and stable performance.

2, using infrared lamp heating, strong penetrating power, preform rotation heating, uniform, fast and reliable

3. The infrared lamp tube and reflector plate in the heating zone can be adjusted in width and height. It is suitable for heating various preforms and has automatic temperature control device to ensure the constant temperature in the drying tunnel to achieve the desired effect.

4. Each mechanical action has a safety self-locking device. When a fault occurs, it will automatically alarm and the program will automatically switch to the safe state.

5, each action is driven by the gas source, no pollution, low noise, etc.

6. The design of the gas path divides the action and the blowing into two parts to meet the different requirements of the blowing pressure and the operating pressure, so that the scrapping rate of the product is greatly reduced, and the gas path becomes clear at a glance.

7, the use of double curved arm link clamping, clamping force and other advantages

8. The production process is fully automated, with the advantages of low investment, high efficiency, convenient operation, simple maintenance and safety.

9, the machine is easy to install and maintain


技術參數   General Information
TH-5000-2-cavity
合模力 Clamping Force
50 T
開模行程 Clamping Stoke
350mm
最大拉伸 Max.Stretching Stroke
420mm
瓶底行程 Bottom Moving Stroke
0-50mm
 腔數 Number of Cavities
2 Cavity
產量 Theoretical Output
1-6L:900-1500 BPH
最大模厚 Max.Mould Thickness
300mm
模板尺寸 Mould plate size
630x630mm
功率 Total Power(Full Loaded)
10-25KW
高壓空壓機 Min air compressor
3.2m3/min 3.0Mpa
低壓空壓機 Min air compressor
1.6m3/min 1.0Mpa
                    Electrical System
電壓 Voltage Standard
380v/3PH/50Hz or special order
加熱區 Number of Heating Zone
2 Sections
功率 Total Power(Full Loaded)
50KW
                    Container 制品容積
最大制品容積 Container Volume
1.0-6.0L
瓶口尺寸 Neck Diameter Range
38-60mm
最大直徑 Container Diameter
300mm
容器高度 Container Height
400mm
                    Air system
低壓系統 Low Air compessor
8-10Bar
高壓系統 High Air compessor
30-40Bar
                    Net dimension & Weight(LxWxH)凈尺寸和凈重
主機 Blow Molding Machine
350x200x200cm
上料機尺寸 Preform Autoloader  
250x220x220cm
凈重 Net Weight
3.8T

久热这里只精品99国产6,精品国产自在现线拍,久青草国产在线观看视频,亚洲欧美中文日韩视频,亚洲国产在线2020最新